| |
Dry sprinkler systems use automatic and closed sprinkler heads. However unlike the wet systems that hold water in the pipes, these systems contain compressed air or nitrogen. This air holds a remote valve, known as a dry pipe valve, in a closed position. Located in a heated space, the dry-pipe valve prevents water from entering the pipe until a fire causes one or more sprinklers to operate. Once this happens, the air escapes and the dry pipe valve releases. Water then enters the pipe, flowing through open sprinklers onto the fire. If activated the water is released once the air is evacuated from the system. These systems are mainly used for colder areas or uncontrolled temperature areas that could be exposed to lower temperatures to avoid pipe freezing.
|
|
|
|
|
|
| |
CMP Fire wants you and your family to feel protected and stress free. At CMP Fire we work to try to meet your personal needs and are very caring about protecting you, your family, and belongings. |
|
 
| |
Protect yourself, your place of business,and the lives of those around you by investing in a Commercial Sprinkler System. |
|
| |
Wet sprinkler systems are the most common type of sprinkler Installation that will not allow water to discharge, unless it is activated by an extreme amount of heat. |
|
| |
Dry sprinkler systems use automatic and closed sprinkler heads. However unlike the wet systems that hold water in the pipes, these systems contain compressed air or nitrogen. |
|
| |
Deluge sprinkler systems are rare and usually only used in areas at risk for high hazard fire and minor explosions as they provide a simultaneous application of water over the entire hazard. |
|
|
